The DJ 'S' is a solid-built cartridge with a fine spherical stylus and a specially developed, and extremely balanced twin-tubed cantilever. Not only does this cartridge have impressive tracking ability, but it is also nearly unbreakable and provides the DJ with that most-needed stringency and robustness. Furthermore, the stylus-cut offers very-low record wear. All in all, it ticks the box for versatility.
Product Availability (rrp):
Concorde DJ 'S' (plug-in) - £85
Concorde DJ 'S' Twin Pack - £185
Concorde DJ 'S' + 1 Stylus Kit - £116
OM DJ 'S' (1/2 inch mount) - £58
Stylus DJ 'S' - £42
Stylus DJ 'E' - £52.50
TECHNICAL DATA ORTOFON DJ 'S'
Output voltage at 1000 Hz, 5cm/sec. - 6 mV
Channel balance at 1 kHz - 2 dB
Channel separation at 1 kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range - 20-20.000 Hz
Frequency response - 20-18.000 Hz + 3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542 - < 1%
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 9 µm/mN
Stylus type - Spherical
Stylus tip radius - R 18 µm
Equivalent stylus tip mass - 0,6 mg
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force, recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge colour, body/stylus - Blue/Blue
Cartridge weight - 18,5 g
Replacement stylus unit - DJ S
TECHNICAL DATA ORTOFON DJ 'E'
Frequency range - 20-22.000 Hz
Frequency response - 20-20.000 Hz ± 2 dB
FIM distortion at recommended tracking force, DIN 45.542 - < 1%
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 9 µm/mN
Stylus type - Special elliptical
Stylus tip radius - r/R 13/25 µm
Equivalent stylus tip mass - 0,6 mg
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force, recommended - 3,0 g (30 mN)
Tracking angle - 20°
Stylus colour - Blue
